Matrigel Step By Step Guide

Matrigel® Step By Step Guide

1. Thoroughly cleanse, tone and exfoliate the skin. Thoroughly moisten the area to be treated, either with water or specific active solution/ampoule & water.
2. Open the sealed MatriGel® mask with dry hands and either place the matrix shapes onto the moistened skin (excluding eye areas). Damp down well. OR You can place the shapes into a small bowl, add water, wait for gel to form. Stir with spatula. Apply with masking brush.
3. Now spread and massage this pliable and viscose gel over the skin for approximately 10-20 minutes by applying continuous moisture by steam, sponge or brush.
4. (A) Direct steam (not ozone) on to the areas being treated at a 30-40cm distance. Steaming should continue during the entire treatment or regularly dampen areas with moistened sponge or brush. 4(B)If steaming is contra-indicated or not available you may use a sponge moistened with water, a soft brush or a trigger spray with water. Soak the cosmetic sponge or brush in liquid required and apply thoroughly by light dabbing. Moisten regularly with the fingertips dipped in water to achieve optimum pliability of the gel while massaging.
5. Do not let the mask dry. If this happens, re-dampen, wait for it to gel again.
6. Thoroughly and completely remove remaining gel with tissue followed by warm compress.
7. After complete removal, dry skin completely with tissues.
8. Finish treatment with light moisturizing emulsion for appropriate skin type 

    Back to Matrigel Product Page